AMRAP stands for “As Many Rounds As Possible” (or sometimes “As Many Reps As Possible” , depending on the workout structure). It is a common workout format used to measure performance and intensity during a set time period.

How AMRAP Works

Time-Capped Workout: You are given a specific amount of time (e.g., 10 minutes, 20 minutes) to complete as many rounds or repetitions of a prescribed set of exercises as possible.

Fixed Set of Movements: Each round typically consists of a series of exercises with a specified number of repetitions for each movement. Goal : The objective is to complete as many full rounds (or reps) as you can within the time limit while maintaining proper form and intensity.

Example of an AMRAP Workout

12-Minute AMRAP:

10 Push-Ups
15 Air Squats
20 Double-Unders

In this example, you would perform 10 push-ups, 15 air squats, and 20 double-unders as one round. Then, you would repeat the sequence as many times as possible within the 12-minute time frame.

Scoring

Your score is the total number of rounds completed, plus any additional reps you finished in the final, incomplete round. For example, if you completed 3 full rounds and 10 additional push-ups in the fourth round, your score would be written as 3+10 .

Benefits of AMRAP Workouts

Measures Progress: AMRAP workouts allow you to track improvements over time by comparing scores from previous attempts.

Builds Endurance: They challenge both cardiovascular and muscular endurance.

Encourages Intensity: The time constraint pushes athletes to work at a high intensity.

Scalable: AMRAP workouts can be scaled to suit all fitness levels by adjusting weights, movements, or rep schemes.

Tips for Success

Pace Yourself: Start at a sustainable pace to avoid burning out early.

Prioritize Form: Maintain proper technique to prevent injury, especially as fatigue sets in.

Plan Transitions: Minimize rest between exercises to maximize efficiency.

Final Thoughts

AMRAP is a versatile and effective way to build fitness and test your limits!

1.2 - Configuration

How to configure the AMRAP timer.

The configuration of a timer does not impact the configuration of other timers.

Click the Settings tab of the timer.

Changing Settings

To change settings, manipulate the scroll wheels, dropdown boxes and choice buttons to adjust the timer settings. The timer will automatically update to reflect the new settings.

The timer will internally remember the current settings until you change them again or load a stowed configuration (see below).

You do not need to click any buttons to apply the settings. The timer will automatically update to reflect the new settings.

Stowing and Loading Settings

You can easily stow your preferred timer settings for future use. With one click, you can load your stowed settings to quickly configure the timer for your workout.

To stow your settings, click the Stow button and enter a name for the stowed configuration.

To load your stowed settings, click the Load button and then click the entry that you want to load. The timer settings will automatically update with the stowed settings.

To delete a stowed setting configuration, click the Load button and then click the trash can icon of the entry that you want to delete.

If you make changes to the configuration, the timer will not overwrite any of your named stowed configurations. However, it will internally remember the current settings until you change them again or load another stowed configuration.

Work Phase Duration

Move the scroll wheels to select the desired duration of one work phase.

The wheels are arranged in the familiar hours : minutes : seconds format.

Time To Prepare Before Workout

If you need a few seconds between pressing the Start button and actually beginning the workout, move the scroll wheel to the desired number of seconds.

The “Play 5 second countdown at start of each phase”, if activated, will count down before the workout starts regardless of the configuration of this setting.

Number of Additional Work Phases

Move the scroll wheel to select the desired number of additional work phases.

If the scroll wheel is at 0, you will have exactly one work phase.

Rest Between Work Phases

Move the scroll wheel to select the desired number of seconds of rest between work phases.

If the scroll wheel is at 0, the one work phase will start immediately after the end of the preceding phase, with no rest time in between.

Sound Signals

Here you can configure what type of sound prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All sound prompts are optional.

Play sound at end of preparation time

This sound will tell you to get ready because the workout is starting.

Play sound at end of work phase

This sound will tell you that the workout phase is done.

Play sound at end of rest period

This sound will tell you that the rest period is done and you must start the next workout phase.

Voice Signals

Here you can configure what type of voice prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All voice prompts are optional.

Play 10 second warning at start of each phase

This voice prompt will tell you that there are ten seconds left before the end of the current activity (workout or rest) and the start of the next activity (workout or rest).

Play 5 second countdown at start of each phase

This voice prompt will count down from 5-4-3-2-1 and beep at 0, starting at 5 seconds before the start of the next activity (workout or rest).

Play voice at start of the work phase

This voice prompt will announce “Go!” at the start of each work phase.

Play voice at start of rest period

This voice prompt will announce “Rest!” at the start of each rest period.

Play voice at end of workout

This voice prompt will announce “Well done!” at the very end of the workout.

Theme Seed Color

Tap the colored button to change the theme color of the timer. The theme color of the rest of the app and/or timers will not be affected.

Tap the Reset button to reset the timer color back to the default theme color for the app.

1.3 - Operation

How to operate the AMRAP timer.

Click the Timer tab of the timer.

Starting, Pausing, Resuming, and Stopping

Click the Start button to start the timer.

At any time you can click the Pause button to pause the timer, which will then change to Resume that you can click to continue the timer.

Click the Stop button to end the timer.

Skipping Phases

At any time during the workout, you can skip the current activity by clicking the button directly below the time display.

For example, if you have a rest period of 60 seconds and you want to start the next AMRAP after only 30 seconds of rest, click the Rest button. That will terminate the rest period and start the next AMRAP.

Actual Workout Stats

Pressing the button to skip ahead to the next activity will increment the actual workout stats.

Pressing the Stop button to abort the workout will not add the interrupted activity to the actual workout stats.

Notes

Click the Notes button to open a text box where you can store free-form text notes, up to a maximum of 1,000 characters.

2 - Countdown

The Countdown Timer

2.1 - Overview

What is Countdown?

A countdown timer is a tool or device that measures and displays the remaining time until a specific event or deadline occurs. It starts from a set amount of time and counts down to zero in seconds.

How It Works

Set Duration: You input the desired time.
Counting Down: The timer begins at the set value and decreases incrementally until it reaches zero.
Alert: When the timer hits zero, it typically signals the end with a sound, visual cue, or notification.

Common Uses

Cooking: To track time for baking or boiling (e.g., a 20-minute timer for cookies).
Productivity: In techniques like the Pomodoro Technique, where you work for 25 minutes and then take a break.
Exercise: To time workouts or rest intervals (e.g., 30 seconds of plank).
Events: Counting down to a launch, holiday, or special occasion (e.g., New Year’s Eve).
Education: To manage time during tests or activities.
Games: To limit turns or rounds in timed challenges.

Countdown timers can be physical (like a kitchen timer) or digital (apps, websites, or built into devices like phones). They’re simple yet versatile, helping people stay on track or build anticipation for something upcoming.

2.2 - Configuration

How to configure the Countdown timer.

The configuration of a timer does not impact the configuration of other timers.

Click the Settings tab of the timer.

Changing Settings

To change settings, manipulate the scroll wheels, dropdown boxes and choice buttons to adjust the timer settings. The timer will automatically update to reflect the new settings.

The timer will internally remember the current settings until you change them again or load a stowed configuration (see below).

You do not need to click any buttons to apply the settings. The timer will automatically update to reflect the new settings.

Stowing and Loading Settings

You can easily stow your preferred timer settings for future use. With one click, you can load your stowed settings to quickly configure the timer for your workout.

To stow your settings, click the Stow button and enter a name for the stowed configuration.

To load your stowed settings, click the Load button and then click the entry that you want to load. The timer settings will automatically update with the stowed settings.

To delete a stowed setting configuration, click the Load button and then click the trash can icon of the entry that you want to delete.

Work Phase Duration

Move the scroll wheels to select the desired duration of one work phase.

The wheels are arranged in the familiar hours : minutes : seconds format.

Time To Prepare Before Workout

If you need a few seconds between pressing the Start button and actually beginning the workout, move the scroll wheel to the desired number of seconds.

The “Play 5 second countdown at start of each phase”, if activated, will count down before the workout starts regardless of the configuration of this setting.

Sound Signals

Here you can configure what type of sound prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All sound prompts are optional.

Play sound at end of preparation time

This sound will tell you to get ready because the workout is starting.

Play sound at end of work phase

This sound will tell you that the workout phase is done.

Voice Signals

Here you can configure what type of voice prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All voice prompts are optional.

Play 10 second warning at start of each phase

This voice prompt will tell you that there are ten seconds left before the end of the current activity (workout or rest) and the start of the next activity (workout or rest).

Play 5 second countdown at start of each phase

This voice prompt will count down from 5-4-3-2-1 and beep at 0, starting at 5 seconds before the start of the next activity (workout or rest).

Play voice at start of the work phase

This voice prompt will announce “Go!” at the start of each work phase.

Play voice at end of workout

This voice prompt will announce “Well done!” at the very end of the workout.

Theme Seed Color

Tap the colored button to change the theme color of the timer. The theme color of the rest of the app and/or timers will not be affected.

Tap the Reset button to reset the timer color back to the default theme color for the app.

2.3 - Operation

How to operate the Countdown timer.

Click the Timer tab of the timer.

Starting, Pausing, Resuming, and Stopping

Click the Start button to start the timer.

At any time you can click the Pause button to pause the timer, which will then change to Resume that you can click to continue the timer.

Click the Stop button to end the timer.

Skipping Phases

At any time during the workout, you can skip the current activity by clicking the button directly below the time display.

Actual Workout Stats

Pressing the button to skip ahead to the next activity will increment the actual workout stats.

Pressing the Stop button to abort the workout will not add the interrupted activity to the actual workout stats.

Notes

Click the Notes button to open a text box where you can store free-form text notes, up to a maximum of 1,000 characters.

3 - Death By

The Death By Timer

3.1 - Overview

What is Death By?

The “Death by…” workout is a specific type of high-intensity interval training (HIIT) format commonly found in CrossFit. It’s known for its relentless progression and extreme physical and mental challenge. The name “Death by…” is hyperbolic, emphasizing the difficulty of the workout rather than any literal danger. These workouts are designed to push athletes to their limits by increasing the workload every minute, leaving little to no time for rest as the rounds progress.

Structure of “Death by…” Workouts

Minute-by-Minute Progression:

Each minute, you perform an increasing number of repetitions of a specific exercise.
For example:
- Minute 1: 1 rep
- Minute 2: 2 reps
- Minute 3: 3 reps
- And so on…

Goal:

Complete the required number of reps within each minute.
Any remaining time in the minute is your rest period.
If you fail to complete the reps within the minute, the workout ends, and your score is the last round you successfully finished.

Example:

“Death by Burpees”:
- Minute 1: 1 burpee
- Minute 2: 2 burpees
- Minute 3: 3 burpees
- Continue until you can no longer complete the required reps within the minute.

Common Exercises:

Burpees
Wall balls
Thrusters
Kettlebell swings
Pull-ups
Double-unders
Rowing meters or calories

Why Is It Called “Death by…”?

The name is dramatic and reflects the intense physical and mental fatigue that builds as the workout progresses. By the later rounds, the increasing reps leave almost no time for rest, making it feel nearly impossible to continue. While the name is not meant to be taken literally, the workout can feel overwhelming due to the exponential increase in effort required.

Key Features of “Death by…” Workouts

Progressive Overload:

The workload increases every minute, forcing athletes to manage their energy and pace themselves early on.
This creates a unique challenge because the difficulty compounds over time.

Mental Toughness:

These workouts test mental resilience as much as physical endurance. Athletes must push through discomfort and fatigue to survive as many rounds as possible.

Short Rest Periods:

As the reps increase, the rest time decreases. By the later rounds, there may be only seconds—or no time at all—to recover before starting the next set.

Scalability:

Coaches often modify the exercises or cap the number of rounds to make the workout accessible for different fitness levels. For example, beginners might use lighter weights or fewer rounds.

Example of a “Death by…” Workout

“Death by Wall Balls”

Equipment: A medicine ball (typically 20 lbs for men, 14 lbs for women).
Movement: Squat down, then explosively stand up and throw the ball to a target (usually 10 feet high).
Progression:
- Minute 1: 1 wall ball
- Minute 2: 2 wall balls
- Minute 3: 3 wall balls
- Continue until failure.

If you fail to complete the required reps within a minute, your score is the last round you successfully completed. For instance, if you finish 15 reps in Minute 15 but can’t complete 16 reps in Minute 16, your score is 15.

Benefits of “Death by…” Workouts

Cardiovascular Endurance:

The constant movement and decreasing rest periods improve heart and lung capacity.

Mental Grit:

Pushing through fatigue and discomfort builds mental toughness.

Work Capacity:

These workouts train your body to handle higher workloads over time.

Versatility:

The format can be adapted to almost any exercise, making it highly customizable.

Challenges and Risks

Fatigue-Induced Form Breakdown:

As the workout progresses, form may deteriorate due to exhaustion, increasing the risk of injury. Proper scaling and coaching are essential.

Overtraining:

These workouts are extremely taxing and should not be performed frequently without adequate recovery.

Pacing Mistakes:

Starting too fast can lead to burnout early in the workout. Learning to pace yourself is critical.

Tips for Success

Scale Appropriately:

Modify weights, movements, or reps to match your fitness level. For example, use a lighter medicine ball or substitute air squats for thrusters.

Focus on Form:

Prioritize proper technique over speed to avoid injury.

Pace Yourself:

Start conservatively to conserve energy for the later rounds.

Listen to Your Body:

Stop if you feel pain or excessive fatigue that compromises safety.

Final Thoughts

“Death by…” workouts are a hallmark of CrossFit programming, combining physical endurance with mental resilience. They are challenging, scalable, and versatile, making them suitable for athletes of all levels when approached with care. While the name may sound intimidating, these workouts are safe and effective when performed with proper technique, pacing, and coaching. Always prioritize safety and smart training practices to get the most out of these intense sessions.

3.2 - Configuration

How to configure the For Time timer.

The configuration of a timer does not impact the configuration of other timers.

Click the Settings tab of the timer.

Changing Settings

To change settings, manipulate the scroll wheels, dropdown boxes and choice buttons to adjust the timer settings. The timer will automatically update to reflect the new settings.

The timer will internally remember the current settings until you change them again or load a stowed configuration (see below).

You do not need to click any buttons to apply the settings. The timer will automatically update to reflect the new settings.

Stowing and Loading Settings

You can easily stow your preferred timer settings for future use. With one click, you can load your stowed settings to quickly configure the timer for your workout.

To stow your settings, click the Stow button and enter a name for the stowed configuration.

To load your stowed settings, click the Load button and then click the entry that you want to load. The timer settings will automatically update with the stowed settings.

To delete a stowed setting configuration, click the Load button and then click the trash can icon of the entry that you want to delete.

Work Phase Duration

Move the scroll wheels to select the desired duration of one work phase.

The wheels are arranged in the familiar hours : minutes : seconds format.

If set to zeroes, the work phase duration will be unlimited.

Time To Prepare Before Workout

If you need a few seconds between pressing the Start button and actually beginning the workout, move the scroll wheel to the desired number of seconds.

The “Play 5 second countdown at start of each phase”, if activated, will count down before the workout starts regardless of the configuration of this setting.

Sound Signals

Here you can configure what type of sound prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All sound prompts are optional.

Play sound at end of preparation time

This sound will tell you to get ready because the workout is starting.

Play sound at end of work phase

This sound will tell you that the workout phase is done.

Voice Signals

Here you can configure what type of voice prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All voice prompts are optional.

Play 10 second warning at start of each phase

This voice prompt will tell you that there are ten seconds left before the end of the current activity (workout or rest) and the start of the next activity (workout or rest).

Play 5 second countdown at start of each phase

This voice prompt will count down from 5-4-3-2-1 and beep at 0, starting at 5 seconds before the start of the next activity (workout or rest).

Play voice at start of the work phase

This voice prompt will announce “Go!” at the start of each work phase.

Theme Seed Color

Tap the colored button to change the theme color of the timer. The theme color of the rest of the app and/or timers will not be affected.

Tap the Reset button to reset the timer color back to the default theme color for the app.

3.3 - Operation

How to operate the Death By timer.

Click the Timer tab of the timer.

Starting, Pausing, Resuming, and Stopping

Click the Start button to start the timer.

At any time you can click the Pause button to pause the timer, which will then change to Resume that you can click to continue the timer.

Click the Stop button to end the timer.

Skipping Phases

At any time during the workout, you can skip the current activity by clicking the button directly below the time display.

For example, to start the next round click the Work button. That will immediately start the next round.

Actual Workout Stats

Pressing the button to skip ahead to the next activity will increment the actual workout stats.

Pressing the Stop button to abort the workout will not add the interrupted activity to the actual workout stats.

Notes

Click the Notes button to open a text box where you can store free-form text notes, up to a maximum of 1,000 characters.

4 - Descending

The Descending Timer

4.1 - Overview

What is Descending?

A “Descending” workout decreases work interval durations while often increasing rest periods.

This structure helps maintain intensity as fatigue accumulates.

Example Workout

Round 1: 60 seconds work (e.g., burpees) / 10 seconds rest

Round 2: 45 seconds work / 20 seconds rest

Round 3: 30 seconds work / 30 seconds rest

Shorter bursts allow maximum effort despite mounting fatigue.

Benefits

Prioritizes technique and power output as rest increases.
Reduces injury risk by shortening strain periods over time.
Ideal for “finisher” routines to exhaust remaining energy.

Use Cases

Strength training circuits with compound movements.
Sprint intervals where form preservation is critical.

Key Considerations

Escalating suits athletes building workload tolerance.

Descending aids in managing fatigue while sustaining effort.

Both can adapt rest/work ratios (e.g., static rest with escalating work).

Final Thoughts

By tailoring these timers to fitness goals, users can optimize progress, whether aiming for endurance gains or explosive power retention.

4.2 - Configuration

How to configure the Descending timer.

The configuration of a timer does not impact the configuration of other timers.

Click the Settings tab of the timer.

Changing Settings

To change settings, manipulate the scroll wheels, dropdown boxes and choice buttons to adjust the timer settings. The timer will automatically update to reflect the new settings.

The timer will internally remember the current settings until you change them again or load a stowed configuration (see below).

You do not need to click any buttons to apply the settings. The timer will automatically update to reflect the new settings.

Stowing and Loading Settings

You can easily stow your preferred timer settings for future use. With one click, you can load your stowed settings to quickly configure the timer for your workout.

To stow your settings, click the Stow button and enter a name for the stowed configuration.

To load your stowed settings, click the Load button and then click the entry that you want to load. The timer settings will automatically update with the stowed settings.

To delete a stowed setting configuration, click the Load button and then click the trash can icon of the entry that you want to delete.

First Work Phase Duration

Move the scroll wheels to select the desired duration of the first work phase.

The wheels are arranged in the familiar hours : minutes : seconds format.

Decrease Each Work Phase

Move the scroll wheel to select the number of seconds by which each subsequent work phase must decrease.

Number of Additional Work Phases

Move the scroll wheel to select the desired number of additional work phases.

If the scroll wheel is at 0, you will have exactly one work phase.

First Rest Period Duration

Move the scroll wheels to select the desired duration of the first rest period.

The wheels are arranged in the familiar hours : minutes : seconds format.

Increase Each Rest Period

Move the scroll wheel to select the number of seconds by which each subsequent rest period must increase.

Time To Prepare Before Workout

If you need a few seconds between pressing the Start button and actually beginning the workout, move the scroll wheel to the desired number of seconds.

The “Play 5 second countdown at start of each phase”, if activated, will count down before the workout starts regardless of the configuration of this setting.

Sound Signals

Here you can configure what type of sound prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All sound prompts are optional.

Play sound at end of preparation time

This sound will tell you to get ready because the workout is starting.

Play sound at end of work phase

This sound will tell you that the workout phase is done.

Play sound at end of rest period

This sound will tell you that the rest period is done and you must start the next workout phase.

Voice Signals

Here you can configure what type of voice prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All voice prompts are optional.

Play 10 second warning at start of each phase

This voice prompt will tell you that there are ten seconds left before the end of the current activity (workout or rest) and the start of the next activity (workout or rest).

Play 5 second countdown at start of each phase

This voice prompt will count down from 5-4-3-2-1 and beep at 0, starting at 5 seconds before the start of the next activity (workout or rest).

Play voice at start of the work phase

This voice prompt will announce “Go!” at the start of each work phase.

Play voice at start of rest period

This voice prompt will announce “Rest!” at the start of each rest period.

Play voice at end of workout

This voice prompt will announce “Well done!” at the very end of the workout.

Theme Seed Color

Tap the colored button to change the theme color of the timer. The theme color of the rest of the app and/or timers will not be affected.

Tap the Reset button to reset the timer color back to the default theme color for the app.

4.3 - Operation

How to operate the Descending timer.

Click the Timer tab of the timer.

Starting, Pausing, Resuming, and Stopping

Click the Start button to start the timer.

At any time you can click the Pause button to pause the timer, which will then change to Resume that you can click to continue the timer.

Click the Stop button to end the timer.

Skipping Phases

At any time during the workout, you can skip the current activity by clicking the button directly below the time display.

Actual Workout Stats

Pressing the button to skip ahead to the next activity will increment the actual workout stats.

Pressing the Stop button to abort the workout will not add the interrupted activity to the actual workout stats.

Notes

Click the Notes button to open a text box where you can store free-form text notes, up to a maximum of 1,000 characters.

5 - EMOM

The EMOM Timer

5.1 - Overview

What is EMOM?

EMOM stands for “Every Minute On the Minute.” It is a type of interval training structure used in workouts where a specific task or set of exercises must be completed at the start of every minute. Once the work is completed, the athlete rests for the remainder of that minute before starting again at the top of the next minute.

How EMOM Works

Start of the Minute: At the beginning of each minute, you perform a predetermined number of reps or a specific task.

Rest Period: After completing the work, the remaining time in that minute is your rest period.

Repeat: The process repeats at the start of every subsequent minute for a set duration (e.g., 10 minutes, 20 minutes, etc.).

Example of an EMOM Workout

10-Minute EMOM:

Minute 1: 10 kettle bell swings
Minute 2: 5 pull-ups
Repeat this pattern for 10 minutes.

Alternatively:

8-Minute EMOM:

Every minute, complete 12 wall balls and 8 push-ups. Rest for the remainder of the minute.

Benefits of EMOM Workouts

Pacing and Consistency: EMOMs help athletes practice pacing by encouraging consistent performance across all intervals.

Built-In Rest: The rest period ensures recovery, allowing athletes to maintain intensity over longer durations.

Scalability: EMOMs can be scaled to suit different fitness levels by adjusting reps, weights, or complexity of movements.

Time Efficiency: EMOMs are structured and timed, making them a great way to fit a challenging workout into a limited time.

Key Considerations

Work-to-Rest Ratio: If the work takes too long (e.g., more than 45 seconds), there won’t be enough rest, which can compromise performance in later rounds. Proper scaling is crucial.

Task Complexity: EMOMs can involve one exercise, multiple exercises, or even a mix of strength and conditioning movements.

Final Thoughts

EMOMs are a versatile tool in fitness programming and can be adapted for strength, endurance, skill development, or metabolic conditioning.

5.2 - Configuration

How to configure the EMOM timer.

The configuration of a timer does not impact the configuration of other timers.

Click the Settings tab of the timer.

Changing Settings

To change settings, manipulate the scroll wheels, dropdown boxes and choice buttons to adjust the timer settings. The timer will automatically update to reflect the new settings.

The timer will internally remember the current settings until you change them again or load a stowed configuration (see below).

You do not need to click any buttons to apply the settings. The timer will automatically update to reflect the new settings.

Stowing and Loading Settings

You can easily stow your preferred timer settings for future use. With one click, you can load your stowed settings to quickly configure the timer for your workout.

To stow your settings, click the Stow button and enter a name for the stowed configuration.

To load your stowed settings, click the Load button and then click the entry that you want to load. The timer settings will automatically update with the stowed settings.

To delete a stowed setting configuration, click the Load button and then click the trash can icon of the entry that you want to delete.

Work Phase Duration

Move the scroll wheels to select the desired duration of one work phase.

The wheels are arranged in the familiar hours : minutes : seconds format.

Time To Prepare Before Workout

If you need a few seconds between pressing the Start button and actually beginning the workout, move the scroll wheel to the desired number of seconds.

The “Play 5 second countdown at start of each phase”, if activated, will count down before the workout starts regardless of the configuration of this setting.

Number of Additional Work Phases

Move the scroll wheel to select the desired number of additional work phases.

If the scroll wheel is at 0, you will have exactly one work phase.

Sound Signals

Here you can configure what type of sound prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All sound prompts are optional.

Play sound at end of preparation time

This sound will tell you to get ready because the workout is starting.

Play sound at end of work phase

This sound will tell you that the workout phase is done.

Voice Signals

Here you can configure what type of voice prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All voice prompts are optional.

Play 10 second warning at start of each phase

This voice prompt will tell you that there are ten seconds left before the end of the current activity (workout or rest) and the start of the next activity (workout or rest).

Play 5 second countdown at start of each phase

This voice prompt will count down from 5-4-3-2-1 and beep at 0, starting at 5 seconds before the start of the next activity (workout or rest).

Play voice at start of the work phase

This voice prompt will announce “Go!” at the start of each work phase.

Play voice at end of workout

This voice prompt will announce “Well done!” at the very end of the workout.

Theme Seed Color

Tap the colored button to change the theme color of the timer. The theme color of the rest of the app and/or timers will not be affected.

Tap the Reset button to reset the timer color back to the default theme color for the app.

5.3 - Operation

How to operate the EMOM timer.

Click the Timer tab of the timer.

Starting, Pausing, Resuming, and Stopping

Click the Start button to start the timer.

At any time you can click the Pause button to pause the timer, which will then change to Resume that you can click to continue the timer.

Click the Stop button to end the timer.

Skipping Phases

At any time during the workout, you can skip the current activity by clicking the button directly below the time display.

For example, to start the next EMOM before the set duration elapses, click the Work button. That will immediately start the next set.

Actual Workout Stats

Pressing the button to skip ahead to the next activity will increment the actual workout stats.

Pressing the Stop button to abort the workout will not add the interrupted activity to the actual workout stats.

Notes

Click the Notes button to open a text box where you can store free-form text notes, up to a maximum of 1,000 characters.

6 - Escalating

The Escalating Timer

6.1 - Overview

What is Escalating?

A “Escalating” workout increases work interval durations while often decreasing rest periods.

The goal is to build endurance and mental resilience by gradually intensifying the challenge.

Example Workout

Round 1: 20 seconds work (e.g., sprinting) / 20 seconds rest

Round 2: 30 seconds work / 15 seconds rest

Round 3: 40 seconds work / 10 seconds rest

Total time per round increases, demanding greater stamina.

Benefits

Enhances aerobic and anaerobic capacity.
Mimics real-life scenarios where effort peaks over time (e.g., sports finals).
Encourages pacing strategy early on to conserve energy for longer intervals.

Use Cases

Endurance training for runners or cyclists.
HIIT workouts focusing on progressive overload.

Final Thoughts

These workouts focus on building endurance and gradually increasing intensity.

6.2 - Configuration

How to configure the Escalating timer.

The configuration of a timer does not impact the configuration of other timers.

Click the Settings tab of the timer.

Changing Settings

To change settings, manipulate the scroll wheels, dropdown boxes and choice buttons to adjust the timer settings. The timer will automatically update to reflect the new settings.

The timer will internally remember the current settings until you change them again or load a stowed configuration (see below).

You do not need to click any buttons to apply the settings. The timer will automatically update to reflect the new settings.

Stowing and Loading Settings

You can easily stow your preferred timer settings for future use. With one click, you can load your stowed settings to quickly configure the timer for your workout.

To stow your settings, click the Stow button and enter a name for the stowed configuration.

To load your stowed settings, click the Load button and then click the entry that you want to load. The timer settings will automatically update with the stowed settings.

To delete a stowed setting configuration, click the Load button and then click the trash can icon of the entry that you want to delete.

First Work Phase Duration

Move the scroll wheels to select the desired duration of the first work phase.

The wheels are arranged in the familiar hours : minutes : seconds format.

Increase Each Work Phase

Move the scroll wheel to select the number of seconds by which each subsequent work phase must increase.

Number of Additional Work Phases

Move the scroll wheel to select the desired number of additional work phases.

If the scroll wheel is at 0, you will have exactly one work phase.

First Rest Period Duration

Move the scroll wheels to select the desired duration of the first rest period.

The wheels are arranged in the familiar hours : minutes : seconds format.

Decrease Each Rest Period

Move the scroll wheel to select the number of seconds by which each subsequent rest period must decrease.

Time To Prepare Before Workout

If you need a few seconds between pressing the Start button and actually beginning the workout, move the scroll wheel to the desired number of seconds.

The “Play 5 second countdown at start of each phase”, if activated, will count down before the workout starts regardless of the configuration of this setting.

Sound Signals

Here you can configure what type of sound prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All sound prompts are optional.

Play sound at end of preparation time

This sound will tell you to get ready because the workout is starting.

Play sound at end of work phase

This sound will tell you that the workout phase is done.

Play sound at end of rest period

This sound will tell you that the rest period is done and you must start the next workout phase.

Voice Signals

Here you can configure what type of voice prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All voice prompts are optional.

Play 10 second warning at start of each phase

This voice prompt will tell you that there are ten seconds left before the end of the current activity (workout or rest) and the start of the next activity (workout or rest).

Play 5 second countdown at start of each phase

This voice prompt will count down from 5-4-3-2-1 and beep at 0, starting at 5 seconds before the start of the next activity (workout or rest).

Play voice at start of the work phase

This voice prompt will announce “Go!” at the start of each work phase.

Play voice at start of rest period

This voice prompt will announce “Rest!” at the start of each rest period.

Play voice at end of workout

This voice prompt will announce “Well done!” at the very end of the workout.

Theme Seed Color

Tap the colored button to change the theme color of the timer. The theme color of the rest of the app and/or timers will not be affected.

Tap the Reset button to reset the timer color back to the default theme color for the app.

6.3 - Operation

How to operate the Escalating timer.

Click the Timer tab of the timer.

Starting, Pausing, Resuming, and Stopping

Click the Start button to start the timer.

At any time you can click the Pause button to pause the timer, which will then change to Resume that you can click to continue the timer.

Click the Stop button to end the timer.

Skipping Phases

At any time during the workout, you can skip the current activity by clicking the button directly below the time display.

Actual Workout Stats

Pressing the button to skip ahead to the next activity will increment the actual workout stats.

Pressing the Stop button to abort the workout will not add the interrupted activity to the actual workout stats.

Notes

Click the Notes button to open a text box where you can store free-form text notes, up to a maximum of 1,000 characters.

7 - For Time

The For Time Timer

7.1 - Overview

What is For Time?

A “For Time” workout is a type of workout structure where the goal is to complete a prescribed set of exercises and repetitions as quickly as possible. The athlete starts the workout and performs all the required movements in order, aiming to finish the entire workout in the shortest time possible. The clock starts when the workout begins and stops when the last repetition is completed.

Key Characteristics of “For Time” Workouts

Fixed Repetitions: The workout specifies a certain number of reps for each exercise, which must be completed in sequence.

No Rest Periods: Unlike interval workouts (e.g., EMOM or AMRAP), there are no predetermined rest periods. Athletes can rest whenever they need to, but the clock keeps running, so resting increases the total time.

However, our For Time timer does have an optional rest timer to make it more flexible.

Intensity Focus: Since the goal is to complete the workout as fast as possible, athletes typically push themselves to maintain a high level of intensity throughout.

Scoring by Time: The final score for a “For Time” workout is the total time it takes to complete all the prescribed work. Faster times indicate better performance.

Example of a “For Time” Workout

“Grace” (a classic CrossFit benchmark workout):

Task: 30 Clean & Jerks (at 135 lbs for men / 95 lbs for women)
Goal: Complete all 30 repetitions as quickly as possible.
Scoring : Your time might be something like 3:45 (3 minutes and 45 seconds).

Another example:

Workout:

50 Wall Balls
40 Push-Ups
30 Box Jumps
20 Pull-Ups
10 Burpees
Goal : Complete all the movements in order as fast as possible.
Scoring : If you finish in 12:30, your score is 12 minutes and 30 seconds.

Benefits of “For Time” Workouts

Measurable Progress: Since the score is based on time, athletes can track their progress over time by attempting the same workout again and aiming for a faster completion time.

High Intensity: The focus on speed encourages athletes to push themselves harder, which can improve cardiovascular endurance, strength, and mental toughness.

Simplicity: “For Time” workouts are straightforward—complete the work as fast as possible—which makes them easy to understand and execute.

Versatility: These workouts can be scaled to any fitness level by adjusting weights, reps, or movement complexity.

Key Considerations

Pacing: While the goal is to finish quickly, pacing is critical. Starting too fast can lead to burnout early in the workout, especially in longer “For Time” workouts.

Movement Standards: Proper form and movement standards must be maintained, even when racing against the clock. Sacrificing technique for speed can lead to injury.

Scaling: Beginners or less experienced athletes should scale the workout (e.g., reduce weight, modify movements, or lower reps) to ensure safety while still achieving a challenging effort.

Rest Strategy: Although there are no prescribed rest periods, strategic breaks (e.g., taking a few seconds to breathe during high-rep sets) can help maintain overall performance.

Variations of “For Time”

Rounds For Time (RFT):

Instead of completing a single set of exercises, athletes perform multiple rounds of the same sequence. For example:

Workout : 3 Rounds For Time:

10 Deadlifts
15 Box Jumps
20 Sit-Ups
Goal : Complete all 3 rounds as quickly as possible.

Time Caps:

Some “For Time” workouts include a time cap , which is the maximum amount of time allowed to complete the workout. If the athlete doesn’t finish within the time cap, their score is recorded as the total reps completed at the cutoff time.

Final Thoughts

“For Time” workouts are a staple of fitness programming because they challenge athletes to balance speed, efficiency, and technique. They provide a clear, measurable way to assess performance and improvement over time, making them a favorite among both beginners and advanced athletes.

7.2 - Configuration

How to configure the For Time timer.

The configuration of a timer does not impact the configuration of other timers.

Click the Settings tab of the timer.

Changing Settings

To change settings, manipulate the scroll wheels, dropdown boxes and choice buttons to adjust the timer settings. The timer will automatically update to reflect the new settings.

The timer will internally remember the current settings until you change them again or load a stowed configuration (see below).

You do not need to click any buttons to apply the settings. The timer will automatically update to reflect the new settings.

Stowing and Loading Settings

You can easily stow your preferred timer settings for future use. With one click, you can load your stowed settings to quickly configure the timer for your workout.

To stow your settings, click the Stow button and enter a name for the stowed configuration.

To load your stowed settings, click the Load button and then click the entry that you want to load. The timer settings will automatically update with the stowed settings.

To delete a stowed setting configuration, click the Load button and then click the trash can icon of the entry that you want to delete.

Work Phase Duration

Move the scroll wheels to select the desired duration of one work phase.

The wheels are arranged in the familiar hours : minutes : seconds format.

If set to zeroes, the work phase duration will be unlimited.

Time To Prepare Before Workout

If you need a few seconds between pressing the Start button and actually beginning the workout, move the scroll wheel to the desired number of seconds.

The “Play 5 second countdown at start of each phase”, if activated, will count down before the workout starts regardless of the configuration of this setting.

Number of Additional Work Phases

Move the scroll wheel to select the desired number of additional work phases.

If the scroll wheel is at 0, you will have exactly one work phase.

Sound Signals

Here you can configure what type of sound prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All sound prompts are optional.

Play sound at end of preparation time

This sound will tell you to get ready because the workout is starting.

Play sound at end of work phase

This sound will tell you that the workout phase is done.

Play sound at end of rest period

This sound will tell you that the rest period is done and you must start the next workout phase.

Voice Signals

Here you can configure what type of voice prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All voice prompts are optional.

Play 10 second warning at start of each phase

This voice prompt will tell you that there are ten seconds left before the end of the current activity (workout or rest) and the start of the next activity (workout or rest).

Play 5 second countdown at start of each phase

This voice prompt will count down from 5-4-3-2-1 and beep at 0, starting at 5 seconds before the start of the next activity (workout or rest).

Play voice at start of the work phase

This voice prompt will announce “Go!” at the start of each work phase.

Play voice at start of rest period

This voice prompt will announce “Rest!” at the start of each rest period.

Play voice at end of workout

This voice prompt will announce “Well done!” at the very end of the workout.

Theme Seed Color

Tap the colored button to change the theme color of the timer. The theme color of the rest of the app and/or timers will not be affected.

Tap the Reset button to reset the timer color back to the default theme color for the app.

7.3 - Operation

How to operate the For Time timer.

Click the Timer tab of the timer.

Starting, Pausing, Resuming, and Stopping

Click the Start button to start the timer.

At any time you can click the Pause button to pause the timer, which will then change to Resume that you can click to continue the timer.

Click the Stop button to end the timer.

Skipping Phases

At any time during the workout, you can skip the current activity by clicking the button directly below the time display.

For example, to start the next “unlimited time cap” For Time set, click the Work button. That will immediately start the next set.

Actual Workout Stats

Pressing the button to skip ahead to the next activity will increment the actual workout stats.

Pressing the Stop button to abort the workout will not add the interrupted activity to the actual workout stats.

Notes

Click the Notes button to open a text box where you can store free-form text notes, up to a maximum of 1,000 characters.

8 - General Counter

The General Counter

8.1 - Overview

What is the General Counter?

The General Counter is a very simple tool to help you keep count of things.

It can count up and down is steps of one.

8.2 - Operation

How to operate the General Counter.

Counting Up or Down

Click the Plus button to add one to the total and the Minus button to subtract one from the total.

The counter does not go below zero, i.e., it does not do negative numbers.

Reset The Total

Click the Reset button to set the total to zero.

9 - Interval Training

The Interval Training Timer

9.1 - Overview

What is Interval Training?

Interval training is a type of physical training that alternates between periods of high-intensity exercise and periods of lower-intensity exercise, rest, or recovery. This method is widely used in fitness, sports, and rehabilitation programs to improve cardiovascular endurance, speed, strength, and overall athletic performance.

Key Characteristics of Interval Training

Work Intervals: These are periods of intense physical activity (e.g., sprinting, cycling at maximum effort, or weightlifting).

Rest/Recovery Intervals: These are periods of low-intensity activity (e.g., walking, slow jogging) or complete rest. Repetition : The work-rest cycle is repeated multiple times during a single session.

Customizable: The duration, intensity, and ratio of work to rest can be tailored to individual fitness levels and goals.

Types of Interval Training

High-Intensity Interval Training (HIIT): Short bursts of maximum-effort exercise followed by brief recovery periods. For example, 30 seconds of sprinting followed by 15 seconds of walking, repeated for 15–20 minutes.

TABATA: A specific form of HIIT involving 20 seconds of ultra-high-intensity exercise followed by 10 seconds of rest, repeated for 4 minutes (8 cycles total).

Fartlek Training: A less structured approach combining continuous and interval training, often used in running. For instance, alternating between jogging and sprinting at random intervals.

Sprint Interval Training (SIT): Involves very short, all-out sprints (e.g., 30 seconds) with longer recovery periods (e.g., 4 minutes).

Benefits of Interval Training

Improved Cardiovascular Fitness: Enhances heart and lung efficiency by pushing the body to adapt to varying intensities.

Increased Calorie Burn: Burns more calories in a shorter time compared to steady-state cardio.

Fat Loss: Promotes fat oxidation and boosts metabolism even after the workout (after-burn effect).

Time Efficiency: Ideal for those with busy schedules, as sessions are typically shorter than traditional workouts.

Performance Gains: Enhances speed, power, and endurance for athletes.

Variety: Prevents boredom by breaking up monotony with dynamic changes in intensity.

Example of an Interval Training Session

Warm-up: 5 minutes of light jogging
Work Interval: 1 minute of sprinting
Rest Interval: 2 minutes of walking
Repeat: 6–8 cycles
Cool-down: 5 minutes of stretching

Final Thoughts

Interval training is versatile and can be adapted to various activities like running, swimming, cycling, rowing, or strength training. However, beginners should start with moderate intensity and gradually increase the workload to avoid injury.

9.2 - Configuration

How to configure the Interval Training timer.

The configuration of a timer does not impact the configuration of other timers.

Click the Settings tab of the timer.

Changing Settings

To change settings, manipulate the scroll wheels, dropdown boxes and choice buttons to adjust the timer settings. The timer will automatically update to reflect the new settings.

The timer will internally remember the current settings until you change them again or load a stowed configuration (see below).

You do not need to click any buttons to apply the settings. The timer will automatically update to reflect the new settings.

Stowing and Loading Settings

You can easily stow your preferred timer settings for future use. With one click, you can load your stowed settings to quickly configure the timer for your workout.

To stow your settings, click the Stow button and enter a name for the stowed configuration.

To load your stowed settings, click the Load button and then click the entry that you want to load. The timer settings will automatically update with the stowed settings.

To delete a stowed setting configuration, click the Load button and then click the trash can icon of the entry that you want to delete.

Work Phase Duration

Move the scroll wheels to select the desired duration of one work phase.

The wheels are arranged in the familiar hours : minutes : seconds format.

Time To Prepare Before Workout

If you need a few seconds between pressing the Start button and actually beginning the workout, move the scroll wheel to the desired number of seconds.

The “Play 5 second countdown at start of each phase”, if activated, will count down before the workout starts regardless of the configuration of this setting.

Number of Additional Work Phases

Move the scroll wheel to select the desired number of additional work phases.

If the scroll wheel is at 0, you will have exactly one work phase.

Rest Between Work Phases

Move the scroll wheel to select the desired number of seconds of rest between work phases.

If the scroll wheel is at 0, the one work phase will start immediately after the end of the preceding phase, with no rest time in between.

Number of Additional Rounds

Move the scroll wheel to select the desired number of additional rounds.

If the scroll wheel is at 0, you will have exactly one round, which consist of the selected number of work phases.

Rest Between Rounds

Move the scroll wheel to select the desired number of seconds of rest between rounds.

If the scroll wheel is at 0, the one round will start immediately after the end of the preceding round.

Sound Signals

Here you can configure what type of sound prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All sound prompts are optional.

Play sound at end of preparation time

This sound will tell you to get ready because the workout is starting.

Play sound at end of work phase

This sound will tell you that the workout phase is done.

Play sound at end of rest period

This sound will tell you that the rest period is done and you must start the next workout phase.

Voice Signals

Here you can configure what type of voice prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All voice prompts are optional.

Play 10 second warning at start of each phase

This voice prompt will tell you that there are ten seconds left before the end of the current activity (workout or rest) and the start of the next activity (workout or rest).

Play 5 second countdown at start of each phase

This voice prompt will count down from 5-4-3-2-1 and beep at 0, starting at 5 seconds before the start of the next activity (workout or rest).

Play voice at start of the work phase

This voice prompt will announce “Go!” at the start of each work phase.

Play voice at start of rest period

This voice prompt will announce “Rest!” at the start of each rest period.

Play voice at end of workout

This voice prompt will announce “Well done!” at the very end of the workout.

Theme Seed Color

Tap the colored button to change the theme color of the timer. The theme color of the rest of the app and/or timers will not be affected.

Tap the Reset button to reset the timer color back to the default theme color for the app.

9.3 - Operation

How to operate the Interval Training timer.

Click the Timer tab of the timer.

Starting, Pausing, Resuming, and Stopping

Click the Start button to start the timer.

At any time you can click the Pause button to pause the timer, which will then change to Resume that you can click to continue the timer.

Click the Stop button to end the timer.

Skipping Phases

At any time during the workout, you can skip the current activity by clicking the button directly below the time display.

For example, if you have a rest period of 60 seconds and you want to start the next exercise after only 30 seconds of rest, click the Rest button. That will terminate the rest period and start the next exercise.

Actual Workout Stats

Pressing the button to skip ahead to the next activity will increment the actual workout stats.

Pressing the Stop button to abort the workout will not add the interrupted activity to the actual workout stats.

Notes

Click the Notes button to open a text box where you can store free-form text notes, up to a maximum of 1,000 characters.

10 - Set Counter

The Set Counter

10.1 - Overview

What is the Set Counter?

The Set Counter helps you keep count of the number of sets that you are doing of a workout.

It has an optional rest timer to control the rest time between sets.

It can count up and down in steps of one.

10.2 - Configuration

How to configure the Set Counter.

The configuration of a timer does not impact the configuration of other timers.

Click the Settings tab of the timer.

Changing Settings

To change settings, manipulate the scroll wheels, dropdown boxes and choice buttons to adjust the timer settings. The timer will automatically update to reflect the new settings.

The timer will internally remember the current settings until you change them again or load a stowed configuration (see below).

You do not need to click any buttons to apply the settings. The timer will automatically update to reflect the new settings.

Stowing and Loading Settings

You can easily stow your preferred timer settings for future use. With one click, you can load your stowed settings to quickly configure the timer for your workout.

To stow your settings, click the Stow button and enter a name for the stowed configuration.

To load your stowed settings, click the Load button and then click the entry that you want to load. The timer settings will automatically update with the stowed settings.

To delete a stowed setting configuration, click the Load button and then click the trash can icon of the entry that you want to delete.

Increment Set Counter At

Use the dropdown selector to choose whether you want the rest timer to increment the set counter at the start of the rest period or at the end of the rest period.

Sound Signals

Here you can configure what type of sound prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All sound prompts are optional.

Play sound at end of rest period

This sound will tell you that the rest period is done and you must start the next workout phase.

Voice Signals

Here you can configure what type of voice prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All voice prompts are optional.

Play 10 second warning at start of each phase

This voice prompt will tell you that there are ten seconds left before the end of the current activity (workout or rest) and the start of the next activity (workout or rest).

Play 5 second countdown at start of each phase

This voice prompt will count down from 5-4-3-2-1 and beep at 0, starting at 5 seconds before the start of the next activity (workout or rest).

Theme Seed Color

Tap the colored button to change the theme color of the timer. The theme color of the rest of the app and/or timers will not be affected.

Tap the Reset button to reset the timer color back to the default theme color for the app.

10.3 - Operation

How to operate the Set Counter timer.

Click the Timer tab of the timer.

Starting, Pausing, Resuming, and Stopping The Rest Timer

Click the Start button to start the rest timer.

At any time you can click the Pause button to pause the timer, which will then change to Resume that you can click to continue the timer.

Click the Stop button to end the timer.

Skipping Phases

At any time during the workout, you can skip the rest time by clicking the Skip button directly below the time display.

Select Desired Number of Sets

The scroll wheel next to the set count can be used as a visual cue to remind you of how many sets you want to do.

It is entirely optional and does not affect the functioning of the helper.

Automatically Incrementing The Set Count

If the rest timer is used, it will automatically increment the set count.

Manually Adjusting The Set Count

Click the Plus button to add one to the set count and the Minus button to subtract one from the set count.

The counter does not go below zero, i.e., it does not do negative numbers.

Rest The Set Count

Click the Reset button to set the set count to zero.

11 - Stopwatch

The Stopwatch

11.1 - Overview

What is the Stopwatch?

The Stopwatch is a very basic tool to keep track of the duration of something.

It smallest unit of measure is seconds.

11.2 - Configuration

How to configure the Stopwatch timer.

The configuration of a timer does not impact the configuration of other timers.

Click the Settings tab of the timer.

Changing Settings

To change settings, manipulate the scroll wheels, dropdown boxes and choice buttons to adjust the timer settings. The timer will automatically update to reflect the new settings.

The timer will internally remember the current settings until you change them again or load a stowed configuration (see below).

You do not need to click any buttons to apply the settings. The timer will automatically update to reflect the new settings.

Stowing and Loading Settings

You can easily stow your preferred timer settings for future use. With one click, you can load your stowed settings to quickly configure the timer for your workout.

To stow your settings, click the Stow button and enter a name for the stowed configuration.

To load your stowed settings, click the Load button and then click the entry that you want to load. The timer settings will automatically update with the stowed settings.

To delete a stowed setting configuration, click the Load button and then click the trash can icon of the entry that you want to delete.

Time To Prepare Before Workout

If you need a few seconds between pressing the Start button and actually beginning the workout, move the scroll wheel to the desired number of seconds.

The “Play 5 second countdown at start of each phase”, if activated, will count down before the workout starts regardless of the configuration of this setting.

Sound Signals

Here you can configure what type of sound prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All sound prompts are optional.

Play sound at end of preparation time

This sound will tell you to get ready because the workout is starting.

Voice Signals

Here you can configure what type of voice prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All voice prompts are optional.

Play voice at start of the work phase

This voice prompt will announce “Go!” at the start of each work phase.

Theme Seed Color

Tap the colored button to change the theme color of the timer. The theme color of the rest of the app and/or timers will not be affected.

Tap the Reset button to reset the timer color back to the default theme color for the app.

11.3 - Operation

How to operate the Stopwatch.

Click the Timer tab of the timer.

Starting, Pausing, Resuming, and Stopping

Click the Start button to start the timer.

At any time you can click the Pause button to pause the timer, which will then change to Resume that you can click to continue the timer.

Click the Stop button to end the timer.

12 - TABATA

The TABATA Timer

12.1 - Overview

What is TABATA?

TABATA refers to a specific high-intensity interval training (HIIT) protocol that alternates between short bursts of maximum effort and brief periods of rest. The TABATA method is named after Dr. Izumi TABATA, a Japanese researcher who conducted studies on this type of interval training in the 1990s.

Structure of TABATA

20 seconds of work : Perform an exercise at maximum intensity.
10 seconds of rest : Rest or recover.
Repeat for 8 rounds : This totals 4 minutes of work for a single exercise.

The goal during the 20 seconds of work is to push yourself as hard as possible, aiming for maximum output. The 10 seconds of rest provide just enough recovery to prepare for the next round.

Example of a TABATA Workout

A common TABATA workout might involve one or more exercises. For example:

TABATA Air Squats:

20 seconds of air squats at maximum effort, followed by 10 seconds of rest. Repeat for 8 rounds (4 minutes total).

TABATA Push-Ups:

20 seconds of push-ups at maximum effort, followed by 10 seconds of rest. Repeat for 8 rounds (4 minutes total).

TABATA with Multiple Exercises:

You can also combine multiple exercises in a TABATA format. For instance:

4 minutes of TABATA Air Squats
4 minutes of TABATA Push-Ups
4 minutes of TABATA Pull-Ups

This would result in a 12-minute workout, with each exercise following the 20-seconds-on, 10-seconds-off format.

Benefits of TABATA

Efficiency : TABATA workouts are short but intense, making them ideal for those with limited time.

Increased Metabolic Rate: The high-intensity nature of TABATA helps boost your metabolism and can lead to increased calorie burn even after the workout is over.

Improved Cardiovascular Fitness: The intervals challenge both aerobic and anaerobic systems, improving overall endurance and stamina.

Scalability: TABATA can be applied to almost any exercise (e.g., squats, burpees, rowing, etc.), making it versatile and adaptable to different fitness levels.

Important Considerations

Intensity is Key: To get the full benefits of TABATA, you need to push yourself to your max during the 20 seconds of work. If you’re not working at near-maximum capacity, it’s not truly TABATA.

Form Over Speed: While intensity is important, maintaining proper form is crucial to avoid injury, especially when fatigue sets in.

Not for Beginners: Due to the high intensity, TABATA is often better suited for intermediate to advanced athletes. Beginners may need to scale the intensity or choose less demanding exercises.

“TABATA This”

One well-known CrossFit benchmark workout that uses the TABATA structure is called “TABATA This” :

Complete 8 rounds of 20 seconds on, 10 seconds off, for each of the following exercises:

Pull-Ups
Push-Ups
Sit-Ups
Squats
Row (for calories)

For each exercise, record the lowest number of reps completed in any of the 8 rounds. At the end of all five exercises, add up these “lowest round” numbers to get your total score.

Final Thoughts

In summary, Tabata is a highly effective, time-efficient way to build strength, endurance, and conditioning through short bursts of maximum effort followed by brief rest periods.

12.2 - Configuration

How to configure the TABATA timer.

The configuration of a timer does not impact the configuration of other timers.

Click the Settings tab of the timer.

Changing Settings

To change settings, manipulate the scroll wheels, dropdown boxes and choice buttons to adjust the timer settings. The timer will automatically update to reflect the new settings.

The timer will internally remember the current settings until you change them again or load a stowed configuration (see below).

You do not need to click any buttons to apply the settings. The timer will automatically update to reflect the new settings.

Stowing and Loading Settings

You can easily stow your preferred timer settings for future use. With one click, you can load your stowed settings to quickly configure the timer for your workout.

To stow your settings, click the Stow button and enter a name for the stowed configuration.

To load your stowed settings, click the Load button and then click the entry that you want to load. The timer settings will automatically update with the stowed settings.

To delete a stowed setting configuration, click the Load button and then click the trash can icon of the entry that you want to delete.

Work Phase Duration

Move the scroll wheels to select the desired duration of one work phase.

The wheels are arranged in the familiar hours : minutes : seconds format.

Time To Prepare Before Workout

If you need a few seconds between pressing the Start button and actually beginning the workout, move the scroll wheel to the desired number of seconds.

The “Play 5 second countdown at start of each phase”, if activated, will count down before the workout starts regardless of the configuration of this setting.

Number of Additional Work Phases

Move the scroll wheel to select the desired number of additional work phases.

If the scroll wheel is at 0, you will have exactly one work phase.

Rest Between Work Phases

Move the scroll wheel to select the desired number of seconds of rest between work phases.

If the scroll wheel is at 0, the one work phase will start immediately after the end of the preceding phase, with no rest time in between.

Number of Additional Rounds

Move the scroll wheel to select the desired number of additional rounds.

If the scroll wheel is at 0, you will have exactly one round, which consist of the selected number of work phases.

Rest Between Rounds

Move the scroll wheel to select the desired number of seconds of rest between rounds.

If the scroll wheel is at 0, the one round will start immediately after the end of the preceding round.

Sound Signals

Here you can configure what type of sound prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All sound prompts are optional.

Play sound at end of preparation time

This sound will tell you to get ready because the workout is starting.

Play sound at end of work phase

This sound will tell you that the workout phase is done.

Play sound at end of rest period

This sound will tell you that the rest period is done and you must start the next workout phase.

Voice Signals

Here you can configure what type of voice prompts you want, to help you with executing your workout without having to look at the screen the whole time.

All voice prompts are optional.

Play 10 second warning at start of each phase

This voice prompt will tell you that there are ten seconds left before the end of the current activity (workout or rest) and the start of the next activity (workout or rest).

Play 5 second countdown at start of each phase

This voice prompt will count down from 5-4-3-2-1 and beep at 0, starting at 5 seconds before the start of the next activity (workout or rest).

Play voice at start of the work phase

This voice prompt will announce “Go!” at the start of each work phase.

Play voice at start of rest period

This voice prompt will announce “Rest!” at the start of each rest period.

Play voice at end of workout

This voice prompt will announce “Well done!” at the very end of the workout.

Theme Seed Color

Tap the colored button to change the theme color of the timer. The theme color of the rest of the app and/or timers will not be affected.

Tap the Reset button to reset the timer color back to the default theme color for the app.

12.3 - Operation

How to operate the TABATA timer.

Click the Timer tab of the timer.

Starting, Pausing, Resuming, and Stopping

Click the Start button to start the timer.

At any time you can click the Pause button to pause the timer, which will then change to Resume that you can click to continue the timer.

Click the Stop button to end the timer.

Skipping Phases

At any time during the workout, you can skip the current activity by clicking the button directly below the time display.

For example, if you have a rest period of 10 seconds and you want to start the next round after only 5 seconds of rest, click the Rest button. That will terminate the rest period and start the next round.

Actual Workout Stats

Pressing the button to skip ahead to the next activity will increment the actual workout stats.

Pressing the Stop button to abort the workout will not add the interrupted activity to the actual workout stats.

Notes

Click the Notes button to open a text box where you can store free-form text notes, up to a maximum of 1,000 characters.